Supply+ provides Comprehensive and Refresher training courses designed to meet the needs of both workshop and supervisory personnel. We also provide a range of bespoke training courses tailored specifically to our client’s requirements which can be conducted at either your premises or at our own headquarters in Cambridgeshire
Ladder Maintenance & Testing – Comprehensive Training - Four Day Training Course
This extensive four-day training course is intended for both maintenance staff and their managers who are training for the first time. This course is also intended for personnel who have been trained previously, but have exceeded the three-year refresher training recommendation. The course is designed for a minimum attendance of two people and for maximum of four people at any one time.
The course covers a detailed fault-finding schedule used by Supply+, which checks all Stiles, Channels, Rungs and Mechanical components. This is followed by a full strip down of a 13.5 ladder, to include dismantling of pawls, wire pulley and rope return. In addition, delegates are given a demonstration explanation of removing and replacement of stiles and channels. Delegates are also shown how to clean and re-assemble the ladder.
The course covers the following:
- Full service, observing all aspects detailed in the maintenance procedure, and re-assembly.
- A full demonstration and explanation on rung change procedure followed by a competency test
- A detailed demonstration and explanation on the contents of our Ladder Inspection, Maintenance, Repair and Testing Manual
- A detailed demonstration and explanation on BS EN1147:2010 annual deflection test
- Fault finding, maintenance, testing, inspection and hands-on repair procedures including strip down, rung changing on rivet and truss ladders
- Solo checks to test for competency
Upon completion of the four-day comprehensive ladder maintenance training course, delegates will be competent to:
Fault find
Determine the exact nature of any fault (reported or otherwise), and assess whether it is within their own capabilities to repair.
Maintenance
Correctly service the ladder checking correct inter-component tolerances and lubricate where necessary.
Inspection/Testing
Ensure that the ladder is correctly inspected and apply loading to ensure conformity with relevant BS EN 1147:2010 specification.
Certification
Issue a test certificate to the effect that the ladder complies within the above.
Repair Procedures
Strip down the ladder for full visual inspection and changing of a ladder rung assembly and also fully strip down of a ladder section to allow for the replacement of stiles and channels.
Please contact Karen Hull via email:
Ladder Maintenance & Testing – Refresher Training - Two Day Training Course
This two-day refresher training course is intended for both maintenance staff and their managers who have received training within the last three years. The course is designed for a minimum attendance of two people and for maximum of four people at any one time.
The course covers a detailed fault-finding schedule used by Supply Plus, which checks all Stiles, Channels, Rungs and Mechanical components. This is followed by a full strip down of a 13.5 ladder, to include dismantling of pawls, wire pulley and rope return. Delegates are also shown how to clean and re-assemble the ladder.
The course covers the following:
- Full service, observing all aspects detailed in the maintenance procedure, and re-assembly.
- A full demonstration and explanation on rung change procedure followed by a competency test
- A detailed demonstration and explanation on the contents of our Ladder Inspection, Maintenance, Repair and Testing Manual
- A detailed demonstration and explanation on BS EN1147:2010 annual deflection test, followed by a competency test
- Fault finding, inspection, maintenance, hands on repair and testing procedures including strip down, rung changing on rivet and truss ladders
Upon completion of the two-day ladder maintenance refresher training course, delegates will be competent to:
Fault find
Determine the exact nature of any fault (reported or otherwise), and assess whether it is within their own capabilities to repair.
Maintenance
Correctly service the ladder checking correct inter-component tolerances and lubricate where necessary.
Inspection/Testing
Ensure that the ladder is correctly inspected and apply loading to ensure conformity with relevant BS EN 1147:2010 specification.
Certification
Issue a test certificate to the effect that the ladder complies within the above.
Repair Procedures
Strip down the ladder for full visual inspection and changing of a ladder rung assembly.
Please contact Karen Hull via email:
On Site Training
We can provide a range of bespoke training courses tailored specifically to our client’s requirements which can be conducted at your premises. Should this be a requirement, please contact Karen Hull for further details and costs.
